Hello Giancarlo

You can either contact Mascom or as I did yesterday, Pimseal manufacturers
of Viton and PTFE O rings. They supply most of the manufacturers.
We need O rings and teflon seals for our MAT900-XP and Kiel device on the
MAT253 and the Pimseal contact, Phil Cook said just send one of each to him
and they will be measured up then returned. A price can be given per 100
normally.
The contact is as follows:

Phil Cook
General Manager
Pimseal
Tel: (+44) 0 1242 222000
Fax: (+44) 0 1242 224242
E-Mail: [log in to unmask]


Regards

John Hill
University College London
Mass Spectrometry Facility
Chemistry Dept.

At 11:51 21/04/2004, you wrote:
>Dear list members,
>
>Does anyone know of alternative (i.e. cheaper than ThermoFinnigan)
>suppliers (preferably UK or Europe) for the following Kiel III carbonate
>device:
>
>1 - tubing (described as "hose" in my service manual) for acid from acid
>container to lines 1 and 2
>2 - teflon seal that sits under the disc attached at the top of the
>capillary and the housing of lines 1 and 2
>3 - the teflon tube around the contact pin for the drop counter
>
>Any help would be welcome.
>
>Thank you in advance and best wishes to all,
>
>Giancarlo
>Giancarlo Bianchi
>Palaeoceanography Research Group
>Cardiff School of Earth, Ocean & Planetary Sciences
>Cardiff University
>PO BOX 914
>Cardiff CF10 3YE
>U.K.
>
>Tel.: +44 (0)29 2087 6470
>Fax.: +44 (0)29 2087 4326