Hi Mike,
Sorry I didn't get back to you on friday. Things got very tied up  
around here.
I am in contact with Charter Business to upgrade my bandwidth and add  
additional public fixed ip addresses which likely will assist me in  
configuring  the sonic tz170 for more than one port 80 public server  
on my lan side.
Shy of that, I know nothing about VPN but the sonic has two paid for  
vpn accounts which I am clueless to set up. If they were set up I am  
not sure if they would solve the problem. Right now port 80 traffic  
goes to the heating plant server, If I diable that rule and enable the  
library server rule, port 80 traffic defaults to the win2003 destiny  
library server. I am not sure that vpn traffic would behave any  
differently once it got past the sonicwall.... Anyway I am ok for a  
while with the current setup.



On Jan 30, 2009, at 9:46 AM, Michael I. Lambert wrote:

Hi John,

It's 9:45 and I'm in my office...   Call me when you have a chance on  
my cell and we can see what kind of configuratiion I can come up with...

mikel

===================
Michael I. Lambert
Lambert Associates, Inc.
151 Blair Park Drive,
POB 1528 Williston Vt. 05495-1528

http://www.lawf.com
Phone: +01 802.872.8700
FAX: +01 802.304.1007

PGP Registerd at http://pgpkeys.mit.edu:11371
Signature ID: 0x1E2AB266

NOTICE: If received in error, please destroy and notify sender. Sender  
does not waive confidentiality or privilege, and use is prohibited."



-----Original Message-----
From: "John McSweeney" <[log in to unmask]>
Sent 1/29/2009 1:27:26 PM
To: [log in to unmask]
Subject: trying to configure public servers on sonic tz 170

I should be able to figure this out but haven't. I am trying to set up
several public servers on my lan side of a sonic wall tz 170. I
originally had one x server as a public server running filemaker,
some web pages, and a library server.....
I now need to allow public access to three different servers.
1. the xserve serving filemaker
2. Win 2003 Destiny Library catalog server (port 80 I believe)
3. Our wood chip plant controls using port 1911, 9973, and 3011 and
possibly port 80 since it is web based interface.
When I enable the wood chip controls, I lose my connections to other
servers. I need to be able to force the sonic wall to forward the
request to the appropriate server/service.
Any advice on routing this traffic through my sonic wall is much
appreciated
Thanks
John McSweeney
Cabot School Technologist
[log in to unmask]

John McSweeney
Cabot School Technologist
[log in to unmask]