---------- Forwarded message ----------
Date: Thu, 26 Sep 2002 13:23:19 -0400
From: "L-Soft list server at UVM (1.8d)" <[log in to unmask]>
Reply-To: [log in to unmask]
To: Cristina Castanha <[log in to unmask]>
Subject: You are now subscribed to the ISOGEOCHEM list

Thu, 26 Sep 2002 13:23:19

Your subscription  to the  ISOGEOCHEM list (Stable  Isotope Geochemistry)
has been accepted.

Please save this message for future  reference, especially if this is the
first time you are subscribing to an electronic mailing list. If you ever
need to leave  the list, you will find the  necessary instructions below.
Perhaps  more importantly,  saving a  copy of  this message  (and of  all
future subscription notices  from other mailing lists) in  a special mail
folder will give you instant access to the list of mailing lists that you
are subscribed  to. This may  prove very useful the  next time you  go on
vacation and  need to leave  the lists temporarily so  as not to  fill up
your  mailbox while  you  are away!  You should  also  save the  "welcome
messages" from the  list owners that you will  occasionally receive after
subscribing to a new list.

To send  a message to  all the people  currently subscribed to  the list,
just send mail  to [log in to unmask] This is  called "sending mail
to the  list," because  you send  mail to a  single address  and LISTSERV
makes  copies  for all  the  people  who  have subscribed.  This  address
([log in to unmask])  is also  called the  "list address."  You must
never try to send any command to that address, as it would be distributed
to all the people  who have subscribed. All commands must  be sent to the
"LISTSERV  address,"  [log in to unmask]  It  is  very  important  to
understand  the difference  between the  two, but  fortunately it  is not
complicated. The LISTSERV address is like  a FAX number that connects you
to  a machine,  whereas the  list  address is  like a  normal voice  line
connecting you to a person. If you make a mistake and dial the FAX number
when you wanted to talk to someone on the phone, you will quickly realize
that you  used the wrong  number and call again.  No harm will  have been
done. If on the other hand  you accidentally make your FAX call someone's
voice  line,  the  person  receiving the  call  will  be  inconvenienced,
especially if your FAX then re-dials  every 5 minutes. The fact that most
people will eventually connect the FAX machine to the voice line to allow
the FAX  to go through  and make  the calls stop  does not mean  that you
should continue to send FAXes to  the voice number. People would just get
mad at you.  It works pretty much  the same way with  mailing lists, with
the difference  that you are calling  hundreds or thousands of  people at
the same  time, and consequently  you can expect a  lot of people  to get
upset if you consistently send commands to the list address.

You may  leave the  list at  any time by  sending a  "SIGNOFF ISOGEOCHEM"
command to [log in to unmask] You can also tell LISTSERV how you want
it to confirm the receipt of messages you send to the list. If you do not
trust the system, send a "SET ISOGEOCHEM REPRO" command and LISTSERV will
send  you a  copy of  your own  messages, so  that you  can see  that the
message was distributed and did not get damaged on the way. After a while
you  may find  that this  is getting  annoying, especially  if your  mail
program does not  tell you that the  message is from you  when it informs
you  that new  mail  has arrived  from  ISOGEOCHEM. If  you  send a  "SET
ISOGEOCHEM  ACK  NOREPRO"  command,  LISTSERV   will  mail  you  a  short
acknowledgement  instead,  which  will  look different  in  your  mailbox
directory. With most mail programs you will know immediately that this is
an  acknowledgement  you  can  read  later. Finally,  you  can  turn  off
acknowledgements completely with "SET ISOGEOCHEM NOACK NOREPRO".

Following  instructions from  the list  owner, your  subscription options
have  been set  to  "REPRO  SUBJECTHDR" rather  than  the usual  LISTSERV
defaults. For more information about  subscription options, send a "QUERY
ISOGEOCHEM" command to [log in to unmask]

Contributions sent to this list are automatically archived. You can get a
list  of the  available archive  files by  sending an  "INDEX ISOGEOCHEM"
command to [log in to unmask]  You can then order these  files with a
"GET  ISOGEOCHEM LOGxxxx"  command, or  using LISTSERV's  database search
facilities. Send an  "INFO DATABASE" command for more  information on the
latter.

This  list is  available  in digest  form.  If you  wish  to receive  the
digested  version of  the postings,  just issue  a SET  ISOGEOCHEM DIGEST
command.

Please note that  it is presently possible for anybody  to determine that
you are signed  up to the list  through the use of  the "REVIEW" command,
which returns the e-mail address and  name of all the subscribers. If you
do  not want  your  name to  be  visible, just  issue  a "SET  ISOGEOCHEM
CONCEAL" command.

More  information on  LISTSERV  commands  can be  found  in the  LISTSERV
reference  card, which  you can  retrieve  by sending  an "INFO  REFCARD"
command to [log in to unmask]