Hi Zbigniew,

can't say too much about ver 7.4 (is it really 7.4? I thought 4.x was only 
around), but regarding your problem 1.), I have experienced similar behaviour 
before using 4.0. There was simply a mistake in the original scripting code 
Finnigan provides in version 4.0. You had to manually edit the press adjust 
operation - sorry can't be more specific, since I work in another lab now. 
But this is my best guess.

Cheers

Peter


On Friday 25 November 2005 09:36, Zbigniew Gorczyca wrote:
> Dear Listmembers,
> i'm a user of second-hand MAT 251. Recently I switched from ISODAT ver. 4.1
> to ver 7.4  and from this moment some new problems emerged:
>
> 1. During PRESS ADJUST operation, when sample bellow should be adjusted,
> changeover valve is closed, standard (?!) bellow  is adjusted, and High
> Voltage is off (safety circuit ) = the end of measurement.
>
> 2. PEAK CENTER  operation is sometimes terminated and fatal error "RT
> Bounds exceeded" appears.
>
> Has anybody ever met such symptoms ? Has anybody any idea what they mean
> and how to solve my problems? I will appreciate any help.
>
> best regards,
> Zbigniew
>   -
> dr Zbigniew Gorczyca
> AGH University of Science and Technology
> Faculty of Physics and Applied Computer Sciences
> al. Mickiewicza 30
> PL 30-059 Krakow
> POLAND

-- 
============================================================
Dr Peter Franz

National Institute for Water and Atmospheric Research (NIWA)
301 Evans Bay Pde
Private Bag 14901
Kilbirnie
Wellington
New Zealand

Ph : 	++64-(0)4-386-0506
Fax: 	++64-(0)4-386-2153
Mobile:	++64-(0)211-109304

Email: [log in to unmask]
Website: www.niwa.co.nz
============================================================