Another common and hard to troubleshoot error that pops up this time of
the year is static. Make sure the humidity in the area is good, and the
paper that you're using is not full of static (again from a dry climate
area). In my job before I came to SB I used to have some customer who
would store their paper in plastic baggies to keep them from drying out.
Sounds strange, but if you have a very dry area, try a humidifier, or
even the plastic baggy trick and I bet you'll be surprised.
District Network Services Coordinator
South Burlington School District
550 Dorset Street
South Burlington, VT 05403
From: School Information Technology Discussion
[mailto:[log in to unmask]] On Behalf Of Donahue, Brucie
Sent: Tuesday, February 13, 2007 11:07 AM
To: [log in to unmask]
Subject: color laser issues
I have an HP color LaserJet 2600n that's about 1.5 years old. Recently,
the print quality has seriously declined. The pages are "dirty" and
generally not great quality. I have used the toolbox to clean and
recalibrate. I've also run a "demag" paper through it. If you own one of
these, it this common? Do you have any advice as to how to improve the
print quality? I would also take suggestions on a new HP color laser
This email may contain information protected under the Family
Educational Rights and Privacy Act (FERPA) or the Health Insurance
Portability and Accountability Act (HIPAA). If this email contains
confidential and/or privileged health or student information and you
are not entitled to access such information under FERPA or HIPAA,
federal regulations require that you destroy this email without
reviewing it and you may not forward it to anyone.
This message has been scanned for viruses and
dangerous content by MailScanner, ClamAV and Bitdefender and is
believed to be clean.