OK, Ben, please restart the computer as I also suggested on Friday.
Xiaomei had a problem with the power supply of the magnet. We should try
restarting the computer, and then may be even restart the MS (?) before we
check for other things?
On 3/2/13 8:10 AM, "Marc Ruppenthal"
<[log in to unmask]> wrote:
>I am seeing very strange behavior of our PyroCube coupled to an isoprime
>Systematically, EVERY SECOND deltaD value I measure for IAEA-CH-7 (at
>the moment used as a test for operational readiness of the machine) is
>accurate whereas one value in between two accurate ones is always off,
>sometimes by ten permil, sometimes by 20 or 30 permil (too positive).
>I am using a ceramics reactor filled with glassy C chips operated at
>1360 °C (has always worked in the past). I have already checked the
>usual suspects for malfunction (temperature, flow, leaks) but could
>not find anything.
>Has anybody seen something like this before or does anybody have any
>suggestions what could cause such a pattern? I would be very happy to
>receive some suggestions because I have a hard time figuring out how
>this can be...it is weird...
>Thank you very much in advance for your help and effort!!!
>Dipl.-Geograph Marc Ruppenthal
>AG Prof. Dr. Yvonne Oelmann
>Eberhard Karls Universitaet Tuebingen
>Tel.: +49 (0) 7071 29 77527
>Mobil: +49 (0) 176 96810834
>E-Mail: [log in to unmask]