Is it possible to do a simple microdistillation of the water sample to remove salt residues without it affecting isotope results?
I would think this would be kinder to the Picarro.
From: Stable Isotope Geochemistry <[log in to unmask]> On Behalf Of Mitchell Skuce
Sent: 27. september 2018 00:05
To: [log in to unmask]
Subject: Re: [ISOGEOCHEM] Picarro vaporizer cleaning *delux*
Like the others, I strongly recommend using the mesh inserts. We run oilfield brines (TDS > 300,000mg/L!) routinely on our Picarro, with reasonably good results. Although for those samples, we swap in a clean insert and septum after each sample (~8 injections), and clean the syringe routinely. If you do not, I've noticed that salt buildup will affect your values. As for your current issues, most of the salt build-up is probably just NaCl, so if you run the regular cleaning procedure with DI water, that should take care of most of what's currently in your vaporizer. One suggestion - run the water backwards, so it comes out the injection port. This is because most of the salt will be close to the injection port, so that way you don't 'contaminate' the rest of the vaporizer. Hope that helps - and use the inserts! You won't have to clean it ever again!