I need to know if the indicator light is energized in the load or inject mode on the GasBench II.  On our machine we have a series of pneumatic controllers labelled "Pneumatic division of Parker" and each has a red LED on the top.  There are 2 sets each with 4 controllers.  The controllers are on the left side of the GasBench mounted to the side.  From the front of the Gasbench the controller for the Valco 8-way valve is the 4th one back.

If someone could do the following for me I would really appreciate it.  Remove the cover of their GasBench, check the inject/load mode Isodat is in, then note the status of the light and then toggle the Valco and then note the changed inject/load mode and note the status of the light.  Then let me know so that I can clear up a mystery or decide that I am crazy.

Thanks in advance for any help.  Jason

Here is the order of location of pneumatic valves in UF GasBench II for anyone's future reference (it might help someone someday!):

Front

Trap 2

Flush and Fill

Trap 1

Valco 8-way valve

Open split

Ref 1

Ref 2

Ref 3

Back