Thanks Wes, that’s encouraging! I think part of our experience has been the mixture of B/G (“dumbing down” to B speeds). Looking forward to all G/N next year. Has anyone had issues with this mixture? Does G “dumb down” N traffic in the same way?


on 5/21/09 1:38 PM, Wes Vaughan wrote:

I have a Thin Client laptop lab that runs off of one of those access points. We have had all 24 units going at once as well as others attached to it and didn't have any problems with speed or capacity.

Wes Vaughan

Date: Tue, 19 May 2009 11:46:38 -0400
From: [log in to unmask]">[log in to unmask]
Subject: Re: Wireless in buildings...
To: [log in to unmask]">[log in to unmask]

Re: Wireless in buildings...
We have a similar setup (Linksys WAP54G), but I am skeptical about the capacity of these when our portable labs increase from 12 to 20 next year. Each lab has a dedicated access point. Does anyone have thoughts about the capacity of these APs?


on 5/19/09 9:40 AM, Bill Clark wrote:

I have 6 WAP54G Linksys units, each w/ diff SSID. Have been pretty reliable.
I have found that the security settings will get reset occaisionally with
power/AC weirdness (sags etc). That cisco symbol/light is a source of
confusion --stay away!

Bill Clark
Austine School

Am looking to complete the wireless footprint this summer.

-----Original Message-----
From: School Information Technology Discussion
[mailto:[log in to unmask]] On Behalf Of Craig Lyndes @
Sent: May 19, 2009 9:24 AM
To: [log in to unmask]">[log in to unmask] <http://LIST.UVM.EDU>
Subject: Re: Wireless in buildings...


What you want is "Roaming".  It is a protocol where the wireless access
points hand off a moving workstation to each other, taking over the
communications for that workstation.  It involves the access point that just
acquired a workstation updating the ARP table of every device on the network
with it's MAC address, so the packets will now come to it instead of the
access point that just gave up the workstation.  One of those seemingly
simple things that really is quite amazing when you see it work.

Once you are using access points that support roaming you can have a single
SSID, all of them use the same channel (and have identical security
settings).  The broadcast ranges of the access points can overlap (should
overlap if you want uninterrupted coverage) and the workstation will select
the strongest signal when it starts up, picking up another signal once it
reaches a weakness threshold.  The switch over is noticeable on the
workstation, if you are doing a download you will see it pause for 2 or 3

I have done 3 buildings very economically with Linksys WAP54G access points
($70).  They function well and are inexpensive enough to have a spare on
hand for fault tolerance.  To manage them I have a web page that has a link
for every access point described by location.  They have a lit cisco symbol
on the front that if pressed reprograms them to some brain dead setting
Linksys thinks you want, so I cover that to keep little fingers away.

Craig Lyndes
Franklin Central SU
> A couple of weeks ago there was a thread about wireless in schools.
> I'm looking to wire our school district (one large building) with
> wireless access. Apple Airport Base Stations are not really working out
for us.
> Even
> with multiple channels on the base stations, computers continue to not
> choose base stations closest to them. I'm looking for a solution to go
> back to a one network name (SSID) throughout the district. What brands
> of equipment are you using? Also, there are services that come in to
> see where optimum placements of base stations would be - does anyone
> have a couple of vendors?
> Thanks,
> Bryan
> Bryan Thompson
> Technology Coordinator
> Winooski School District
> Winooski, VT 05404
> 802-655-2555

Hotmail® has a new way to see what's up with your friends. Check it out. <>