Print

Print


Nothing that’s consistent.

 

For instance, I just logged in as me on the machine I’m building. This time our “N: drive” mapping didn’t appear and isn’t usable in explorer, but is accessible via the command prompt. It also took a few minutes for the drives to show up. There is nothing more than the informational entries in the Group Policy logs.

 

Sometimes, though, I get the warnings or errors that say something to the effect of “Completed Group Policy Drive Maps Extension Processing in 151735 milliseconds” (actual entry & processing time)… BUT, that never necessarily corresponds with having these issues. I went probably went a good half dozen logins before I saw the issue repeat.

 

This is happening with two separate GPOs, too. My main work machine uses a special GPO for our IT group and the peripheral machine I’m working on is using our general user GPO.

 

Mickey Mossey

 

From: Technology Discussion at UVM [mailto:[log in to unmask]] On Behalf Of Geoffrey Duke
Sent: Tuesday, October 13, 2015 11:31 AM
To: [log in to unmask]
Subject: Re: Odd GPO Mapped Drives issue in Windows 10

 

Mickey, this is a very curious behavior. Is there anything in the event logs that corresponds to the time that your drive-mapping process runs? If it’s straight-up Group Policy Preferences, there should be events logged when they happen.

 

--Geoff

 

From: Technology Discussion at UVM [mailto:[log in to unmask]] On Behalf Of Mickey Mossey
Sent: Monday, October 12, 2015 11:42 AM
To: [log in to unmask]
Subject: Odd GPO Mapped Drives issue in Windows 10

 

So, here’s something super odd. I have been using Group Policy Objects to map drives on our systems now for years. These policies have been set up and they work absolutely fine in my environment which is 99%+ Windows 7 currently. I have been running Windows 10 since the first day it was available to us here, because you know, I’m brave. I had seen throughout the last three or so months on my system that occasionally out of nowhere, I’d completely lose a mapped drive. When I’d pull up an application I wrote that helps my users map drives while remotely, the tool would actually report the drive was already mapped – even though it wasn’t in Windows at all. Occasionally toggling the drive off and then back on would bring it back, other times I’d need to reboot my computer to get it back. Then, it’d disappear again down the road. Because I’m a patient person and this was my personal machine, I shelved the issue and moved on to more important things.

 

Fast forward to today… I’m considering building my first Windows 10 machine that will be used by my user, so now we’re working with different hardware completely. I get the machine all built, domain joined and all is well. Then I notice that one of our mapped drives “J:” is not showing up. We have some applications that look at configurations that sit on this drive and when I try to use them they complain that they can’t find the file. Now, this is where things get weird… I drop down to a command prompt and I switch to the drive, and it’s there! I can list the files, change directories, etc. But, it’s completely unavailable to Windows. See the screenshot at the bottom of this email and you’ll see me listing the mapped drive, but not able to access it. Running a gpresult says that the mapping was a success.

 

Unfortunately, this isn’t 100% reproducible. The next startup, all drives could be mapped and available, or one or more might be like this. I do allow time for the processing of the GPO, I’m on a gig wired network connection and the system is a 3rd Gen i7 with 16gb of RAM and an SSD.

 

Anyone have any thoughts?

 

[log in to unmask]">

 

Mickey Mossey

Senior Associate Director of Information Technology

Programming & System Administration

University of Vermont Foundation

 

Personal Line:   802-656-4133

IT Main Line:    802-656-8310

 

UVM Foundation Website: http://www.uvmfoundation.org

UVM’s Alumni Website:   http://alumni.uvm.edu