Print

Print


Good morning  Vermont IT folks

How would you like to be part of a FUN project that we complete as a
community

A few brave playful souls on this list  are interested in the collaborative
 build of a RepRap 3D printer build from 'mostly'  3D printed parts
http://reprap.org/wiki/Snappy

There are about 30 3D printed parts.   Looks like printing the small parts
won't be a problem.. But we could use some help with the bigger parts

We are looking for folks who to help print the a couple of the  11 larger
parts
 If we can get 5 folks willing to print 2 parts each  to join the team...
this would be super helpful


Anyone????? want to help?  Reply here or Email Lucie  [log in to unmask]
or Rodney  Batschelet off list.

Here is are the larger parts we need help printing:

jhead_platform_parts.stl
<https://github.com/revarbat/snappy-reprap/blob/master/STLs/jhead_platform_parts.stl>
Added
assembly instructions.
<https://github.com/revarbat/snappy-reprap/commit/d32cdeb19039c9e25f03d7a49c498b76efcd91d7>
Larger
Printer
rail_segment_parts.stl
<https://github.com/revarbat/snappy-reprap/blob/master/STLs/rail_segment_parts.stl>
Z
cable chain and wiring.
<https://github.com/revarbat/snappy-reprap/commit/59c399aaa8df13c2bf3b5c60cf53ab711616b539>
Larger
Printer
rail_xy_motor_segment_parts.stl
<https://github.com/revarbat/snappy-reprap/blob/master/STLs/rail_xy_motor_segment_parts.stl>
Z
cable chain and wiring.
<https://github.com/revarbat/snappy-reprap/commit/59c399aaa8df13c2bf3b5c60cf53ab711616b539>
Larger
Printer
rail_z_motor_segment_parts.stl
<https://github.com/revarbat/snappy-reprap/blob/master/STLs/rail_z_motor_segment_parts.stl>
Z
cable chain and wiring.
<https://github.com/revarbat/snappy-reprap/commit/59c399aaa8df13c2bf3b5c60cf53ab711616b539>
Larger
Printer
rambo_mount_parts.stl
<https://github.com/revarbat/snappy-reprap/blob/master/STLs/rambo_mount_parts.stl>
Reduced
parts sizes to be printable in a 150x150mm area.
<https://github.com/revarbat/snappy-reprap/commit/b8657931cee8acafafaf56d14b3a258052735390>
Larger
Printer
sled_endcap_parts.stl
<https://github.com/revarbat/snappy-reprap/blob/master/STLs/sled_endcap_parts.stl>
Reduced
parts sizes to be printable in a 150x150mm area.
<https://github.com/revarbat/snappy-reprap/commit/b8657931cee8acafafaf56d14b3a258052735390>
Larger
printer
spool_holder_parts.stl
<https://github.com/revarbat/snappy-reprap/blob/master/STLs/spool_holder_parts.stl>
Reduced
parts sizes to be printable in a 150x150mm area.
<https://github.com/revarbat/snappy-reprap/commit/b8657931cee8acafafaf56d14b3a258052735390>
Larger
Printer
xy_joiner_parts.stl
<https://github.com/revarbat/snappy-reprap/blob/master/STLs/xy_joiner_parts.stl>
Z
cable chain and wiring.
<https://github.com/revarbat/snappy-reprap/commit/59c399aaa8df13c2bf3b5c60cf53ab711616b539>
Larger
Printer
xy_sled_parts.stl
<https://github.com/revarbat/snappy-reprap/blob/master/STLs/xy_sled_parts.stl>
Removed
redundant slop offset for XY sled rack.
<https://github.com/revarbat/snappy-reprap/commit/4adc0dcc3c662cef60b8a199672f4606227c78cb>
Larger
Printer
yz_joiner_parts.stl
<https://github.com/revarbat/snappy-reprap/blob/master/STLs/yz_joiner_parts.stl>
Reduced
parts sizes to be printable in a 150x150mm area.
<https://github.com/revarbat/snappy-reprap/commit/b8657931cee8acafafaf56d14b3a258052735390>
Larger
Printer
z_sled_parts.stl
<https://github.com/revarbat/snappy-reprap/blob/master/STLs/z_sled_parts.stl>
Tighten
up extruder latch. Loosen z_sled threaded rod clamp slightly.
<https://github.com/revarbat/snappy-reprap/commit/a53ab2b9db8c4250c856dc8bc3504909f81e9f4c>
Larger
Printer

The non-3D printed parts have been ordered and we are looking to do the
actual BUILD at VermontFEST.   If you are going to be at VermontFest and
want to take a 30 minute shift in the build progress (no experience
necessary...email Lucie and she'll add you to the team!

So even if you are NOT going to VermontFEST you can be part of this fun
project  by helping us print a couple of the larger parts.

Lucie



Lucie deLaBruere
www.LearningWithLucie.com
http://twitter.com/techsavvygirl

Google Voice (802) 557 0013

[log in to unmask]

--------------------------------------
Nothing is really work unless you would rather be doing something else.
  - James M. Barrie
---------------------------------------
Google Certified Educator / Google for Education Certified Trainer,
Raspberry Pi Certified Educator