MIndy I've been through that process and fortunately did not have to cover the service outside of the day shift.
There are some things you will need to keep in mind about the in-patient side.
First off, you need to understand that when a patient comes to you for an elective outpatient test, they are there to see you and possibly also a doctor or a mid-level provider as well. It's fairly easy to anticipate the work flow demands and scheduling.
In-patients are the other side of the coin. Multiple services are all vying for time with the same individual. You will get to their room and wait for the portable chest x-ray to be taken, then the anesthesia service will round and make you wait while they consult with the patient. You will have to rearrange furniture and monitoring equipment. You will need to wait for help from the floor staff to position patients. And you will have to decontaminate your equipment after each patient.
The bottom line is, in patient tests take much longer and are physically harder on the lab staff.
It is hard to do a good job when trying to stick to a schedule, which may be why your surgeons are dissatisfied with the quality of studies done in a busy radiology department.
It may be easier to train the radiology staff than to take over this burden.
Maybe you've worked in an in-patient setting and you're aware of the frustrations and restrictions.
I'm not trying to discourage you but you should go into this anticipating many logistical complications.
Also be aware that the bean counters have a different appreciation for in-patient studies (they cost the facility rather than generate revenue). Bean counters loath inefficiency, particularly when it costs money. They don't understand why you can't do 16 superb in-patients studies every day per staff member. Also know that when you finally get Mr. Whoosey back off the potty chair, back into bed and finally get that glimpse of the renal artery stent you've been hunting for your pager will go off and your surgeon will want you in the OR stat to look at something.

Cheers,
Steve

On Mon, Jan 9, 2017 at 1:08 PM, Jeff Stanley <[log in to unmask]> wrote:

This sounds like something that should be worked out and agreed on with your medical director, the radiology director, and hospital admin for your staff to have privileges to work in the hospital (unless you are already employed by the hospital).   Or work something out to where the hospital techs can visit you in your outpatient lab to learn your techniques, protocols, and criteria.  We are also an outpatient lab and this has also been briefly mentioned to take over the inpatient labs but with multiple locations and hospitals that our surgeons work in, it would be very political and might cause world war three.  One of our techs has privileges to go to one of the hospital’s operating rooms to assist our surgeons with some arterial procedures and in order for him to be able to do that it involved a lot of paperwork and approval before he was able to go work in the hospital.  Almost wasn’t worth it.

 

 

Jeff Stanley BS, RVT
Vascular Lab Manager
THE SURGICAL CLINIC, PLLC
356 24th Ave North, Suite 300
Nashville, TN 37203
Phone: 615.301.5261 | Fax: 615.320.3662
www.TSClinic.com

 

From: UVM Flownet [mailto:[log in to unmask]edu] On Behalf Of Audrey Fleming
Sent: Monday, January 09, 2017 2:27 PM
To: [log in to unmask]
Subject: Re: Vascular Lab and Inpatient studies

 

I hope this proposal will be to perform ALL vascular studies 24/7. I think if you are going to start performing inpatient studies, then you need to be prepared to take call and perform all the vascular studies. It is unfair to "cherry pick" the daytime impatient studies and leave the after hours work for someone else. T, and radiology, may be more amenable if they can see a benefit from somoen coming in and taking revenue from their department.

 

Audrey

 

From: Mindy Crotwell <[log in to unmask]>
To: [log in to unmask]
Sent: Monday, January 9, 2017 7:30 PM
Subject: Vascular Lab and Inpatient studies


Hi everyone,
I wanted to ask a question to everyone out there.  Right now our lab is an outpatient lab.  We are connected to the hospital but only see outpatients.  My medical director would like us to start going over to the hospital and seeing inpatient studies.  Right now the general ultrasound (under the radiology department) handles everything done in the hospital including vascular studies.  A few of them are RVT's however that is not there specialty and our Medical director is not happy with their studies.  I agree with him in that we need to start going over to the hospital and seeing these patient.  I am trying to put a proposal together on why it is important for vascular lab to be present in the hospital performing these specific studies. 

Does anyone out there know of any good articles I can reference to help my case?

I always appreciate all the great advice I get on here. 

Thanks in advance,

Mindy Crotwell, BS, RVT
UAB Kirklin Clinic
Birmingham, AL
205-801-8895

To unsubscribe or search other topics on UVM Flownet link to:
http://list.uvm.edu/archives/uvmflownet.html

To unsubscribe or search other topics on UVM Flownet link to: http://list.uvm.edu/archives/uvmflownet.html

This message is intended only for the use of the individual(s) to whom it is addressed and contains information that is privileged, confidential, and exempt from disclosure under applicable law. Any further dissemination or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by telephone or email as listed in our signature above. This message is provided in accordance with the HIPAA Omnibus Rule of 2013.
To unsubscribe or search other topics on UVM Flownet link to: http://list.uvm.edu/archives/uvmflownet.html

To unsubscribe or search other topics on UVM Flownet link to: http://list.uvm.edu/archives/uvmflownet.html