Print

Print


Mike, I am not going to be around this weekend, but would be glad to  
help where ever starting Monday. I would love to help out with some  
fabrication, but might need to be taught a little before hand.  
Hopefully I can do some work next week.
Connor
On Feb 8, 2008, at 12:23 AM, Michael Murray wrote:

> Hey Team,
>
> There are a few systems that need to be worked on and completed.  
> These are good opportunities for younger members to get involved in  
> but will need the supervision/direction of some returning members.
>
> A big one is the suspension fabrication.
> Remaining on that segment are:
>
> Fix the location of front tabs. Modify Polaris A-Arms to fit last  
> year's geometry (cutting off of through bolts and welding in tube  
> inserts)
> Fabricate upper shock mounts.
> Fabricate tie rods - steering rack is in the mail
>
> Once the next batch of tabs gets cut (see additional email) the  
> rear links can get built. Those will go pretty quick based on their  
> layout and the use of jigs.
>
> The rear of the frame will be set to go next week pending a few  
> final touches in other areas. That will go pretty quick as well.  
> Pretty simple machining and fabrication.
>
> Driver Controls:
> Gas Pedal, Brake Pedal, master cylinder mounting (only after front  
> susp is done), dashpanel, etc. Last years pedal design works ok but  
> I encourage someone to think of a different setup maybe a little  
> lighter and less fabrication (not that last years was that much but  
> you get the idea)
>
> I've attached a pdf of a task list. check it out. I'll be hanging a  
> more detailed on up in the shop so sign up on it starting tomorrow  
> and such. Might get a way to have this posted on the website and  
> log in to update/check up in it.
>
> Like I said, the remaining work is perfect for young guys to get  
> involved, but its going to take the support of returning  
> members.Ideally, some of you can take on as "head" of these tasks  
> since you've been exposed to it in the past and at the same time,  
> can teach people the techniques involved. Start singing up with  
> stuff you are interested in.
>
>
> Have a good night.
> Mike
>
>
>
> ---------------------------
>
> Think before you send!!! By hitting reply, you will reply to the  
> ENTIRE listserv. If you wish to send a personal reply to the  
> orginal poster and NOT the entire listserv, copy and paste their  
> address and compose a new message.
> Save yourself the embarrassment and think twice!
>
> http://www.uvm.edu/~minibaja/2006-2007/
> Currently Transitioning to updated 2007-2008 template<team to do  
> list.pdf>

---------------------------

Think before you send!!! By hitting reply, you will reply to the ENTIRE listserv. If you wish to send a personal reply to the orginal poster and NOT the entire listserv, copy and paste their address and compose a new message.
Save yourself the embarrassment and think twice!

http://www.uvm.edu/~minibaja/2006-2007/
Currently Transitioning to updated 2007-2008 template